How much do gutters cost for a whole house in Houston?

Angi’s Houston data shows an average project of about $927 and a typical range of $539 to $1,325. A full seamless system on a larger two-story home with 6-inch gutters and several downspouts often costs more. Using national unit prices, 170 feet of 6-inch seamless gutters with downspouts works out to roughly $1,400 to $2,800.

Are 6-inch gutters worth the extra cost in Houston?

On large or two-story homes, usually yes. HomeGuide puts the upgrade at about $1 to $2 more per foot, and larger gutters with 3x4-inch downspouts handle Houston’s heavy bursts of rain much better.

How much do gutter guards cost in Houston?

Angi reports $867 to $1,981 for most Houston projects, or about $5.91 to $12.82 per foot installed. National brand systems are often priced much higher per foot.

Do I need a permit for new gutters in Houston?

It depends on the scope. Check the City of Houston’s Residential Permitting 101 guide, and ask the installer whether a permit applies if the job is part of a roof replacement or involves structural repairs.

Gutter Installation Cost in Houston (2026 Guide)

The short answer

According to Angi’s Houston cost data, most gutter installation projects in Houston cost between $539 and $1,325, with an average of about $927. Per linear foot, Houston prices range from about $3 to $25, depending on the material and style. Gutter guard installation in Houston typically runs $867 to $1,981 (average about $1,052), or roughly $5.91 to $12.82 per foot.

Those averages include small jobs, such as a single run over a patio or replacing one side of a house. A full seamless system on a large two-story Houston home, with 6-inch gutters and several downspouts, often costs more than the average. The table below breaks the numbers down so you can estimate your own project.

Houston price ranges at a glance

Project	Published range
Gutter installation, average project in Houston (Angi)	$539 – $1,325 (average about $927)
Gutter installation per linear foot, Houston (Angi)	$3 – $25
K-style gutters per linear foot, Houston (Angi)	about $6 – $7
Seamless aluminum gutters per linear foot, national (HomeGuide)	$6 – $12
Upgrade from 5-inch to 6-inch gutters (HomeGuide)	about $1 – $2 more per foot
Downspouts, per linear foot installed (HomeGuide)	about $2 – $4
Gutter guards, Houston project (Angi)	$867 – $1,981 (average about $1,052)
Gutter guards per linear foot, Houston (Angi)	about $5.91 – $12.82

Published figures for orientation only, not quotes. Your installer measures the home and gives you the actual price.

Estimating your own home, step by step

Gutters are priced by the linear foot, so the first number you need is the length of every roof edge that should get a gutter. On many single-story ranch homes that is 120 to 180 feet. Larger two-story homes with a hip roof can need 200 feet or more. You can get a rough figure from your home’s footprint: walk the eaves, or measure the house on a satellite map.

Then add downspouts. A common rule of thumb is one downspout for every 30 to 40 feet of gutter, and each downspout runs from the gutter to the ground, so a two-story downspout is about 18 to 20 feet long.

Worked example, using only the unit prices in the table (not a quote):

170 feet of seamless aluminum at $6 to $12 per foot: about $1,020 to $2,040
Upgrade to 6-inch gutters at $1 to $2 more per foot: about $170 to $340
Six two-story downspouts, about 115 feet total, at $2 to $4 per foot: about $230 to $460
Micro-mesh gutter guards on 170 feet at about $5.91 to $12.82 per foot: about $1,000 to $2,180

In this example, new 6-inch seamless gutters with downspouts land around $1,400 to $2,800, and the same system with guards around $2,400 to $5,000. Removal of old gutters, fascia repairs and extras like underground drain lines come on top. The spread is wide because labor rates, gauge and hanger quality differ a lot between installers. That is exactly why it pays to compare written quotes.

What drives the price in Houston

Size and downspouts

Houston Hobby averages 51.43 inches of rain a year (National Weather Service, 1991–2020 normals), and much of it falls in heavy bursts. When NOAA updated its Texas rainfall frequency estimates in 2018, the 24-hour rainfall that defines a 100-year storm in the Houston area rose from about 13 to as much as 18 inches. For gutters, capacity matters more than average rainfall. Many Houston installers quote 6-inch gutters with 3x4-inch downspouts on large or two-story homes. The upgrade adds roughly $1 to $2 per foot, which is usually money well spent where roof valleys dump a lot of water into one corner. See 6-inch and oversized gutters.

Stories and access

Two-story homes need taller ladders, more setup time and longer downspouts. Steep roofs and homes with pools, landscaping or fences close to the walls also take longer.

Material and gauge

Seamless aluminum is the standard in Houston. It does not rust and it can be made in one piece per side of the house on site. Steel and copper cost more. Within aluminum, heavier gauge costs a little more but dents less easily when limbs come down in storms. See copper and half-round gutters for premium options.

Hangers and storm resistance

Hurricane Beryl came ashore near Matagorda Bay on July 8, 2024 with maximum sustained winds of about 90 mph, and falling limbs brought down gutters across the region. Quotes differ in how the gutters are attached. Hidden hangers screwed into the rafter tails hold much better than old spike-and-ferrule systems. Angi’s spacing guide recommends no more than 3 feet between hangers, and about 2 feet where storms and heavy rain are common.

Gutter guards

Live oaks shed leaves and pollen tassels in spring, and pines drop needles all year. Fine stainless micro-mesh stops both and is usually the most expensive guard type an independent installer offers, but it is also the one most likely to end ladder work. National brands sold through in-home appointments often quote far more per foot than local installers. Read gutter guards for pine needles vs. leaves before you choose.

How to read a Houston gutter quote

A good written quote lists:

Total linear feet of gutter and the gutter size (5-inch or 6-inch)
Material and gauge (for example seamless aluminum, .027 or .032-inch)
Number, size and length of downspouts, plus any extensions or underground lines
Hanger type and spacing
Removal and disposal of the old gutters
Fascia repair: included, excluded or priced per board
Guard product name, how it is attached and what its warranty covers
Workmanship warranty from the installer

Texas does not license roofing contractors at the state level, and there is no state license for gutter installers to look up. Ask for proof of liability insurance, and do not pay the full amount before the work is finished. If the gutters are part of a roof replacement or include structural repairs, ask whether a City of Houston permit applies. The city’s Residential Permitting 101 guide explains which projects need one.

Ways to keep the cost down

Combine projects. If your roof is due for replacement, put the new gutters up right after it. The fascia is exposed, there is only one setup, and any storm-related insurance claim can cover both.
Get guards with the gutters. Adding guards in the same visit is usually cheaper than a separate trip later.
Compare at least two quotes with the same scope: same size, gauge, downspouts and guard type.
Plan the season. Right after a major storm, demand spikes and schedules fill up. Planning ahead gives you more time to compare.

Ready for prices on your home? One call connects you with an independent installer who serves your ZIP code. See our Houston service area page for local details and communities served.

Gutter installation cost in Houston (2026 guide)